
Medical Bed Blow Molding Machine
A blow-molded medical bed is a medical care device manufactured by a medical bed blow molding machine. It is widely used in hospitals, nursing homes, home care and other scenarios. The following is a detailed introduction to its application characteristics, advantages and applicable scenarios:
Specification Date Sheet
| Basic information | Max products | 500L |
| Machine size | Length*Width*Height 7*3*5.5m | |
| Machine weight | 20T | |
| power consumption | 160KW | |
| evarage consumption | 55kw/h | |
| Plasticing system | screw | 110 Alloy screw for increased durability |
| L/D | 28:1 (High-efficiency mixing head, improved plasticizing ability) | |
| Plasticizing ability | 250KG/H | |
| screw heating section | 5 section | |
| screw heating power | 5kw/section | |
| screw cooling | automatic 5 section | |
| Extrusion motor | 75KW Frequency control of three-phase asynchronous motor | |
| motor brand | DASU | |
| Reduce box | ZLYJ-280 | |
| REDUCE BOX COOLING | Oil cooler water cooling | |
| Machine lifting | 4 points turbine synchronous lift, hydraulic motor drive | |
| Storage tank volume | 20L | |
| Maximum storage capacity | 15K gross weight | |
| Storage tank cooling | water cool | |
| Open and close system | Fixed mold opening and closing mechanism, diagonal double lever horizontal bar center mold clamping, large mold space, mold is fixed by abrasive plate, easy to disassemble, linear rolling guide | |
| Template size | Net width*height 1250*1400mm | |
| max mould size | Width*Height 1000*1600mm | |
| Opening and closing distance | Min-Max 600-1600(mm) | |
| Template movement method | Linear guide movement | |
| Clamping force | HIWIN | |
| linner guide | 1000KN | |
| Open and close mold cylinder | Supercharged oil cylinder with small diameter and high speed, which is 3 times the increase of ordinary oil cylinder | |
| Safety electric eye | red ray inspection | |
| mould cooling | 12 in 8out , effective on cooling mould | |
| Pump system | Controlled by our patented energy-saving hydraulic system, equipped with imported hydraulic valves, imported valves, with smooth and accurate action, factory life, good response | |
| Total system pressure | 14MPA/140KG | |
| servo motor | HaiTian servo motor 30kw | |
| Servo motor driver | HaiTian 30K w | |
| serve motor power | 30kw | |
| Hydraulic oil pump | Sumitomo QT-100CC | |
| Hydraulic solenoid valve | Taiwan youyan | |
| Oil pump form | Screw pump | |
| Hydraulic tubing | 4-layer tubing can withstand 350KG / 35MPA | |
| Electric control system | Using plc imported from Japan, the program is stable, the action is accurate, the function selection is comprehensive, and it is suitable for all finished product needs in the current market | |
| PLC | TAIWAN TAIDA | |
| Expansion module 4DA | TAIWAN TAIDA | |
| Temperature control module | taiwan PID | |
| Solid state voltage regulator | Precise output, long life, no sparks | |
| touch screen | taiwan taida (SCREEN SIZE 11 Inches) | |
| Frequency converter | Mide 75kw | |
| Contactor | LG | |
| air switch | Schneider, France | |
| 24V power supply | Omron Japan | |
| Electronic ruler for storage | Gefran | |
| serve motor ruler | Gefran | |
| Wall thickness controller | 100 POINTS | |
| Thickness servo valve | Atos, Italy | |
| Open and close electronic ruler | gefran italy | |
| Air control system | Adopt Taiwan imported pneumatic original parts, precise adjustment and long service life | |
| Pneumatic two-piece | Taiwan Yadeke | |
| Pneumatic pressure regulator | Taiwan Yadeke | |
| Pneumatic solenoid valve | Taiwan Yadeke | |
| Pneumatic throttle valve | Taiwan Yadeke | |
| Hydraulic | Adopt Taiwan imported pneumatic original parts, precise adjustment and long service life | |
| Oil pump motor | DASU | |
| oil pump motor power | 5.5KWQ | |
| oil pump name | Hydraulic plunger pump | |
| oil pump brand | Japan Yuken | |
| Spare parts for free | Mold platen M24 | 16pcs |
| Temperature control components | Thermocouple K 3pcs | |
| connector | LG GMC40 3pcs | |
| AIR SWITCH | Schneider IC65N 2PCS | |
| fuse | 1box | |
| connector | LG GMC18 2pcs | |
| air valve | 1pcs | |
| screw | M24*110 12pcs |
The core features of blow-molded medical beds
1. Lightweight and durable materials
Usually medical-grade plastics such as high-density polyethylene (HDPE) or polypropylene (PP) are used. Through blow molding, they are light, impact-resistant, and corrosion-resistant, making them easy to move and clean.
The surface is smooth and seamless to avoid bacterial growth and meet medical and health standards.
2. Integrated design
The bed body is mostly blow-molded at one time, without a metal splicing structure, reducing the risk of loosening of connectors and high stability. Some models can be equipped with waterproof mattresses to prevent liquid penetration and facilitate disinfection.
3. Diversified functions
The basic model is fixed height, and the high-end model can adjust the head, foot or overall height of the bed (built-in metal bracket is required) to meet different care needs. Some designs have guardrail slots or bedpan holes to meet clinical needs.
Main application scenarios
1. General wards in hospitals
Suitable for short-term hospitalized patients, light and easy to carry, especially suitable for departments such as pediatrics and emergency departments that require frequent bed adjustments.
2. Nursing homes/rehabilitation centers
Durable and waterproof features are suitable for long-term bedridden elderly people, easy to clean, and reduce the workload of nursing staff.
3. Home care
The lightweight design is easy to move at home, and the no-sharp-angle design reduces the risk of bumps and collisions, which is suitable for home care of disabled patients.
4. Disaster emergency scenarios
Can be quickly mass-produced, low cost, suitable for temporary medical points or disaster relief scenarios.

Blow-molded medical beds are economical, practical, hygienic and convenient. Although they are less functional than high-end metal electric beds, they are highly competitive in the mid- and low-end medical and nursing markets. When choosing, you need to weigh the function and cost based on your actual needs.
Hot Tags: medical bed blow molding machine, China medical bed blow molding machine manufacturers, suppliers, factory, Mannequin Blow Molding Machine, 20 Litre Blow Moulding Machine, Water Tank Moulding Machine, 50 Litre Blow Moulding Machine, Pontoon Blow Molding Machine, Massage Chair Blow Molding Machine
You Might Also Like
Send Inquiry










