Pontoon Blow Molding Machine
Offshore floating platforms are multifunctional marine engineering structures that can float on the water and adapt to wave movement. They are widely used in energy, scientific research, tourism, national defense and other fields. The following is an introduction to its main application scenarios and features:


Specification Date Sheet
| Basic information | Max products | 500L |
| Machine size | Length*Width*Height 7*3*5.5m | |
| Machine weight | 20T | |
| power consumption | 160KW | |
| evarage consumption | 55kw/h | |
| Plasticing system | screw | 110 Alloy screw for increased durability |
| L/D | 28:1 (High-efficiency mixing head, improved plasticizing ability) | |
| Plasticizing ability | 250KG/H | |
| screw heating section | 5 section | |
| screw heating power | 5kw/section | |
| screw cooling | automatic 5 section | |
| Extrusion motor | 75KW Frequency control of three-phase asynchronous motor | |
| motor brand | DASU | |
| Reduce box | ZLYJ-280 | |
| REDUCE BOX COOLING | Oil cooler water cooling | |
| Machine lifting | 4 points turbine synchronous lift, hydraulic motor drive | |
| Storage tank volume | 20L | |
| Maximum storage capacity | 15K gross weight | |
| Storage tank cooling | water cool | |
| Open and close system | Fixed mold opening and closing mechanism, diagonal double lever horizontal bar center mold clamping, large mold space, mold is fixed by abrasive plate, easy to disassemble, linear rolling guide | |
| Template size | Net width*height 1250*1400mm | |
| max mould size | Width*Height 1000*1600mm | |
| Opening and closing distance | Min-Max 600-1600(mm) | |
| Template movement method | Linear guide movement | |
| Clamping force | HIWIN | |
| linner guide | 1000KN | |
| Open and close mold cylinder | Supercharged oil cylinder with small diameter and high speed, which is 3 times the increase of ordinary oil cylinder | |
| Safety electric eye | red ray inspection | |
| mould cooling | 12 in 8out , effective on cooling mould | |
| Pump system | Controlled by our patented energy-saving hydraulic system, equipped with imported hydraulic valves, imported valves, with smooth and accurate action, factory life, good response | |
| Total system pressure | 14MPA/140KG | |
| servo motor | HaiTian servo motor 30kw | |
| Servo motor driver | HaiTian 30K w | |
| serve motor power | 30kw | |
| Hydraulic oil pump | Sumitomo QT-100CC | |
| Hydraulic solenoid valve | Taiwan youyan | |
| Oil pump form | Screw pump | |
| Hydraulic tubing | 4-layer tubing can withstand 350KG / 35MPA | |
| Electric control system | Using plc imported from Japan, the program is stable, the action is accurate, the function selection is comprehensive, and it is suitable for all finished product needs in the current market | |
| PLC | TAIWAN TAIDA | |
| Expansion module 4DA | TAIWAN TAIDA | |
| Temperature control module | taiwan PID | |
| Solid state voltage regulator | Precise output, long life, no sparks | |
| touch screen | taiwan taida (SCREEN SIZE 11 Inches) | |
| Frequency converter | Mide 75kw | |
| Contactor | LG | |
| air switch | Schneider, France | |
| 24V power supply | Omron Japan | |
| Electronic ruler for storage | Gefran | |
| serve motor ruler | Gefran | |
| Wall thickness controller | 100 POINTS | |
| Thickness servo valve | Atos, Italy | |
| Open and close electronic ruler | gefran italy | |
| Air control system | Adopt Taiwan imported pneumatic original parts, precise adjustment and long service life | |
| Pneumatic two-piece | Taiwan Yadeke | |
| Pneumatic pressure regulator | Taiwan Yadeke | |
| Pneumatic solenoid valve | Taiwan Yadeke | |
| Pneumatic throttle valve | Taiwan Yadeke | |
| Hydraulic | Adopt Taiwan imported pneumatic original parts, precise adjustment and long service life | |
| Oil pump motor | DASU | |
| oil pump motor power | 5.5KWQ | |
| oil pump name | Hydraulic plunger pump | |
| oil pump brand | Japan Yuken | |
| Spare parts for free | Mold platen M24 | 16pcs |
| Temperature control components | Thermocouple K 3pcs | |
| connector | LG GMC40 3pcs | |
| AIR SWITCH | Schneider IC65N 2PCS | |
| fuse | 1box | |
| connector | LG GMC18 2pcs | |
| air valve | 1pcs | |
| screw | M24*110 12pcs |
Energy development
- Offshore wind power: Floating foundations support wind turbines, suitable for deep water areas (>50 meters), breaking through the water depth limit of fixed platforms. For example, the Norwegian Hywind project.
- Oil and gas extraction: Floating production storage and offloading units (FPSO) are used in deep-sea oil and gas fields, combining production, storage and loading and unloading functions.
- Ocean energy utilization: Supports renewable energy equipment such as wave energy and temperature difference energy.
Scientific research and environmental protection
- Ocean observation: Equipped with meteorological and hydrological sensors, real-time monitoring of climate change, marine ecology, etc.
- Ecological protection: As artificial coral reefs or marine habitats, it helps ecological restoration.
- Pollution control: Floating platforms can be installed with oil collection devices or sewage treatment facilities.
Tourism and business
- Floating hotels/resorts: Such as the "Floating Venice" project in Dubai, combining leisure and luxury experience.
- Offshore farms: used for aquaculture or crop cultivation, improving fishery efficiency (such as China's "Deep Blue No. 1" fish farming platform).
- Emergency facilities: quickly deploy temporary hospitals or shelters for island or disaster rescue.
Defense and security
- Military bases: modular floating platforms can be used as mobile supply stations or drone landing platforms.
- Border patrols: equipped with monitoring systems to enhance maritime security capabilities.
Cities and transportation
- Floating cities: sustainable solutions to rising sea levels (such as the Oceanix project supported by the United Nations).
- Offshore airports: relieve pressure on land use, such as some floating structures at Kansai Airport in Japan.


Technical features
- Stability design: resist wind and waves through anchor chains, dynamic positioning systems or semi-submersible structures.
- Modular construction: flexible expansion of functions, reducing transportation and installation costs.
- Green technology: integrating solar panels, desalination and other systems to achieve energy self-sufficiency.
Challenges and trends
- Technical difficulties: corrosion, biological adhesion and extreme weather tolerance issues need to be solved.
- Future direction: intelligent (unmanned operation and maintenance), multi-purpose (such as wind power + aquaculture combined platform) and deep-water application.
Offshore floating platforms are becoming an important carrier of the marine economy with their flexibility and sustainability. With the advancement of materials and engineering technology, their application potential will be further released.
Hot Tags: pontoon blow molding machine, China pontoon blow molding machine manufacturers, suppliers, factory, Pallet Blow Molding Machine, HDPE Bottle Blowing Machine, Kayak Blow Molding Machine, Toy Blow Molding Machine, Multi Layer Blow Molding Machine, Tool Box Blow Molding Machine
Next
No InformationYou Might Also Like
Send Inquiry












