Large Blow Molding Machine
The application of large blow molding machine mainly involves the production of outdoor houses (such as tents, inflatable houses, outdoor awnings, etc.), especially the manufacture of hollow plastic parts. The following is an introduction to the application of outdoor house blow molding machine:
Specification Date Sheet
| Basic information | Max products | 1000L |
| Machine size | Length*Width*Height 7*3*5.7m | |
| Machine weight | 27T | |
| power consumption | 220KW | |
| evarage consumption | 160kw/h | |
| Plasticing system | screw | 135 Alloy screw for increased durability |
| L/D | 28:1 (High-efficiency mixing head, improved plasticizing ability) | |
| Plasticizing ability | 400KG/H | |
| screw heating section | 6 section | |
| screw heating power | 5kw/section | |
| screw cooling | automatic 6 section | |
| Extrusion motor | 132KW Frequency control of three-phase asynchronous motor | |
| motor brand | DASU | |
| Reduce box | ZLYJ-375 | |
| REDUCE BOX COOLING | Oil cooler water cooling | |
| Machine lifting | 4 points turbine synchronous lift, hydraulic motor drive | |
| Storage tank volume | 45L | |
| Maximum storage capacity | 35Kgross weight) | |
| Storage tank cooling | water cool | |
| Open and close system | Fixed mold opening and closing mechanism, diagonal double lever horizontal bar center mold clamping, large mold space, mold is fixed by abrasive plate, easy to disassemble, linear rolling guide | |
| Template size | Net width*height 1700*1900mm | |
| max mould size | Width*Height 1600*2000mm | |
| Opening and closing distance | Min-Max 700-1800(mm) | |
| Template movement method | Linear guide movement | |
| Clamping force | HIWIN | |
| linner guide | 1200KN | |
| Open and close mold cylinder | Supercharged oil cylinder with small diameter and high speed, which is 3 times the increase of ordinary oil cylinder | |
| Safety electric eye | red ray inspection | |
| mould cooling | 12 in 8out , effective on cooling mould | |
| Pump system | Controlled by our patented energy-saving hydraulic system, equipped with imported hydraulic valves, imported valves, with smooth and accurate action, factory life, good response | |
| Total system pressure | 14MPA/140KG | |
| servo motor | HaiTian servo motor 26kw | |
| Servo motor driver | HaiTian30kw | |
| serve motor power | 30kw | |
| Hydraulic oil pump | Sumitomo QT-120CC | |
| Hydraulic solenoid valve | Taiwan youyan | |
| Oil pump form | Screw pump | |
| Hydraulic tubing | 4-layer tubing can withstand 350KG / 35MPA | |
| Electric control system | Using plc imported from Japan, the program is stable, the action is accurate, the function selection is comprehensive, and it is suitable for all finished product needs in the current market | |
| PLC | TAIWAN TAIDA | |
| Expansion module 4DA | TAIWAN TAIDA | |
| Temperature control module | taiwan PID | |
| Solid state voltage regulator | Precise output, long life, no sparks | |
| touch screen | taiwan taida (SCREEN SIZE 11 Inches) | |
| Frequency converter | JITAIKE132kw | |
| Contactor | LG | |
| air switch | Schneider, France | |
| 24V power supply | Omron Japan | |
| Electronic ruler for storage | Gefran | |
| serve motor ruler | Gefran | |
| Wall thickness controller | 100 POINTS | |
| Thickness servo valve | Atos, Italy | |
| Open and close electronic ruler | gefran italy | |
| Air control system | Adopt Taiwan imported pneumatic original parts, precise adjustment and long service life | |
| Pneumatic two-piece | Taiwan Yadeke | |
| Pneumatic pressure regulator | Taiwan Yadeke | |
| Pneumatic solenoid valve | Taiwan Yadeke | |
| Pneumatic throttle valve | Taiwan Yadeke | |
| Hydraulic | Adopt Taiwan imported pneumatic original parts, precise adjustment and long service life | |
| Oil pump motor | DASU | |
| oil pump motor power | 5.5KWQ | |
| oil pump name | Hydraulic plunger pump | |
| oil pump brand | Japan Yuken | |
| Spare parts for free | Mold platen M24 | 16pcs |
| Temperature control components | Thermocouple K 3pcs | |
| connector | LG GMC40 3pcs | |
| AIR SWITCH | Schneider IC65N 2PCS | |
| fuse | 1box | |
| connector | LG GMC18 2pcs | |
| air valve | 1pcs | |
| screw | M24*110 12pcs |
Application
1. Inflatable house/tent frame
Blow molding machine can be used to produce the supporting structure of inflatable houses or tents, such as inflatable beams, inflatable columns, etc. These parts are usually made of high-strength and weather-resistant plastics (such as PVC, TPU, etc.), and the hollow structure is formed by the blow molding process, which is both light and strong.
2. Outdoor awning/canopy parts
Hollow plastic parts such as support rods and connectors of awnings can be manufactured by blow molding machines. The blow molding process can produce lightweight, corrosion-resistant, and UV-resistant plastic parts suitable for long-term outdoor use.
3. Inflatable swimming pool/water float
Blow molding machine can be used to produce the side walls, buoyancy devices, etc. of inflatable swimming pools. These products require good air tightness and pressure resistance, and the hollow plastic structure formed by blow molding can meet the requirements.
4. Outdoor furniture
Blow molding is suitable for the production of hollow plastic furniture such as outdoor tables and chairs, storage boxes, etc. These products need to be weather-resistant, waterproof, and impact-resistant. Blow-molded products have the characteristics of low cost and good durability.
5. Inflatable advertising equipment
Outdoor inflatable billboards, arches, etc. are usually composed of blow-molded plastic parts, which are portable and quickly inflated and deflated.
6. Emergency relief tents/temporary housing
Blow molding machines can produce support frames or inflatable walls for disaster relief tents. These products need to be quickly deployed, lightweight and durable. Blow-molded hollow plastic parts are ideal.


Advantages of blow molding machines:
- Lightweight: The hollow structure reduces weight and is easy to transport and install.
- Weather resistance: The plastic material is UV-resistant and resistant to high and low temperatures, suitable for outdoor environments.
- Low cost: The blow molding process is suitable for mass production and reduces the cost of each piece.
- Flexible design: Hollow parts with complex shapes can be produced to meet different needs.
Common materials
- HDPE (high-density polyethylene): impact-resistant and chemical-resistant, suitable for outdoor furniture.
- PVC (polyvinyl chloride): good flexibility, suitable for inflatable products.
- TPU (thermoplastic polyurethane): high strength and wear resistance, used for high-end inflatable products.
Large blow molding machine has a wide range of applications, mainly in the fields of inflatable structures, supporting parts and outdoor furniture. The plastic products it produces have the advantages of lightness, durability and low cost, which are very suitable for outdoor use environments.
Hot Tags: large blow molding machine, China large blow molding machine manufacturers, suppliers, factory, 20 Litre Blow Moulding Machine, Pontoon Blow Molding Machine, Solar Power Base Blow Molding Machine, IBC Barrel Blow Molding Machine, Mannequin Blow Molding Machine, Chemical Barrel Blow Molding Machine
You Might Also Like
Send Inquiry











