Solar Power Base Blow Molding Machine
video

Solar Power Base Blow Molding Machine

The blow molding photovoltaic base is a photovoltaic bracket base component manufactured by a solar power base blow molding machine, which is mainly used to support and fix solar photovoltaic panels. Compared with traditional concrete or metal bases, it has the advantages of lightweight, corrosion resistance, easy installation and low cost, and is especially suitable for distributed photovoltaic, household photovoltaic and special terrain scenarios.
Send Inquiry
Chat Now
Product Introduction

The blow molding photovoltaic base is a photovoltaic bracket base component manufactured by a solar power base blow molding machine, which is mainly used to support and fix solar photovoltaic panels. Compared with traditional concrete or metal bases, it has the advantages of lightweight, corrosion resistance, easy installation and low cost, and is especially suitable for distributed photovoltaic, household photovoltaic and special terrain scenarios.

 

 

Specification Date Sheet

 

Basic information Max products 500L
Machine size Length*Width*Height 7*3*5.5m
Machine weight 20T
power consumption 160KW
evarage consumption 55kw/h
Plasticing system screw 110 Alloy screw for increased durability
L/D 28:1 (High-efficiency mixing head, improved plasticizing ability)
Plasticizing ability 250KG/H
screw heating section 5 section
screw heating power 5kw/section
screw cooling automatic 5 section
Extrusion motor 75KW Frequency control of three-phase asynchronous motor
motor brand DASU
Reduce box ZLYJ-280
REDUCE BOX COOLING Oil cooler water cooling
Machine lifting 4 points turbine synchronous lift, hydraulic motor drive
Storage tank volume 20L
Maximum storage capacity 15K gross weight
Storage tank cooling water cool
Open and close system   Fixed mold opening and closing mechanism, diagonal double lever horizontal bar center mold clamping, large mold space, mold is fixed by abrasive plate, easy to disassemble, linear rolling guide
Template size Net width*height 1250*1400mm
max mould size Width*Height 1000*1600mm
Opening and closing distance Min-Max 600-1600(mm)
Template movement method Linear guide movement
Clamping force HIWIN
linner guide 1000KN
Open and close mold cylinder Supercharged oil cylinder with small diameter and high speed, which is 3 times the increase of ordinary oil cylinder
Safety electric eye red ray inspection
mould cooling 12 in 8out , effective on cooling mould
Pump system   Controlled by our patented energy-saving hydraulic system, equipped with imported hydraulic valves, imported valves, with smooth and accurate action, factory life, good response
Total system pressure 14MPA/140KG
servo motor HaiTian servo motor 30kw
Servo motor driver HaiTian 30K w
serve motor power 30kw
Hydraulic oil pump Sumitomo QT-100CC
Hydraulic solenoid valve Taiwan youyan
Oil pump form Screw pump
Hydraulic tubing 4-layer tubing can withstand 350KG / 35MPA
Electric control system   Using plc imported from Japan, the program is stable, the action is accurate, the function selection is comprehensive, and it is suitable for all finished product needs in the current market
PLC TAIWAN TAIDA
Expansion module 4DA TAIWAN TAIDA
Temperature control module taiwan PID
Solid state voltage regulator Precise output, long life, no sparks
touch screen taiwan taida (SCREEN SIZE 11 Inches)
Frequency converter Mide 75kw
Contactor LG
air switch Schneider, France
24V power supply Omron Japan
Electronic ruler for storage Gefran
serve motor ruler Gefran
Wall thickness controller 100 POINTS
Thickness servo valve Atos, Italy
Open and close electronic ruler gefran italy
Air control system   Adopt Taiwan imported pneumatic original parts, precise adjustment and long service life
Pneumatic two-piece Taiwan Yadeke
Pneumatic pressure regulator Taiwan Yadeke
Pneumatic solenoid valve Taiwan Yadeke
Pneumatic throttle valve Taiwan Yadeke
Hydraulic   Adopt Taiwan imported pneumatic original parts, precise adjustment and long service life
Oil pump motor DASU
oil pump motor power 5.5KWQ
oil pump name Hydraulic plunger pump
oil pump brand Japan Yuken
Spare parts for free Mold platen M24 16pcs
Temperature control components Thermocouple K 3pcs
connector LG GMC40 3pcs
AIR SWITCH Schneider IC65N 2PCS
fuse 1box
connector LG GMC18 2pcs
air valve 1pcs
screw M24*110 12pcs

 

Core features

 

  • Lightweight: The material is mostly HDPE (high-density polyethylene) or modified plastics, and the weight is only 1/5~1/10 of the concrete base, which is easy to transport and install.
  • Strong weather resistance: UV resistance, corrosion resistance, acid and alkali resistance, suitable for high corrosion environments such as coastal areas and saline-alkali land.
  • Casting-free construction: No on-site concrete casting is required, reducing construction period and labor costs.
  • Adjustable design: Some products support height or angle adjustment to adapt to different photovoltaic panel installation requirements.
  • Environmentally friendly and recyclable: The materials can be recycled, reducing carbon emissions, in line with the concept of green energy.

 

Typical application scenarios

 

Distributed photovoltaic power stations: suitable for load-bearing scenarios such as industrial and commercial roofs and residential roofs to avoid damage to the roof structure.

Ground photovoltaic projects: used in complex terrains such as sand, mud, and mountains to avoid foundation excavation and protect the ecological environment.

Agricultural photovoltaics: combined with greenhouses, fish ponds, etc., the plastic base does not damage the soil structure and facilitates agricultural machinery operations.

Temporary/mobile photovoltaics: such as emergency power supply, camping photovoltaics, and other scenarios that require rapid disassembly and assembly.

1
2
3

 

 

 

 

Installation method

 

  • Counterweight type: The hollow part of the base can be filled with sand or water as a counterweight to enhance stability.
  • Anchor type: Fixed to the ground or roof by ground nails or expansion bolts.
  • Combination type: Multiple bases are spliced ​​to adapt to large photovoltaic arrays.

 

Market trend

 

  • Demand growth: With the popularization of household photovoltaic and distributed projects, the demand for lightweight bases has increased.
  • Technological innovation: Develop in the direction of high-strength composite materials, foldable design, and intelligent adjustment.
  • Policy drive: Some regions have higher requirements for environmental protection of photovoltaic construction, promoting plastic bases to replace traditional materials.

 

Precautions

 

Wind resistance: Counterweight or reinforcement schemes need to be designed according to local wind pressure.

Life matching: Select materials added with UV stabilizers to ensure synchronization with the life of photovoltaic panels (more than 25 years).

Fireproof performance: Flame retardants need to be added in some scenarios to meet fire protection standards.

 

1

 

Blow-molded photovoltaic bases have become an important innovation in photovoltaic bracket systems with their advantages of lightness, environmental protection, and economy. They are particularly suitable for projects with high requirements for construction efficiency and environmental friendliness. In the future, with the upgrading of Solar power base blow molding machine technology, the scope of application will be further expanded.

 

Hot Tags: solar power base blow molding machine, China solar power base blow molding machine manufacturers, suppliers, factory, Umbrella Base Blow Molding Machine, Water Tank Moulding Machine, Massage Chair Blow Molding Machine, Kayak Blow Molding Machine, Multi Layer Blow Molding Machine, blow molding machine

Send Inquiry

Home

Phone

E-mail

Inquiry