Vacuum feeding machine card processing
Filter device blockage:
If the equipment is equipped with a blowback device, it should be ensured that the blowback device is working properly every time the material is discharged to clean the filter element.
If there is no blowback device, the filter element needs to be manually disassembled and cleaned. If necessary, an ultrasonic cleaner can be used for cleaning.
Filter blockage caused by material characteristics:
Select the appropriate filter type based on the different characteristics of the material, such as powder thickness, particle size, etc., such as laminated filter bags, PE laminated filters, or stainless steel filters.
Backblowing device malfunction:
Promptly contact the manufacturer for maintenance of the blowback device and resolve system malfunctions.
Excessive residual material in the pipeline:
Regularly clean the residual materials in the pipeline to avoid long-term accumulation and blockage.
Insufficient cylinder pressure:
Adjust the cylinder pressure to an appropriate level to ensure that the gate valve can quickly open.
Leakage or damage at pipeline connections:
Check and tighten all pipeline connection points, and inspect for any damage to the pipelines. Perform regular maintenance.
Extruder jamming processing
Improper storage of materials in the hopper:
Optimize the design and installation position of the hopper, adopt a parabolic structure and ensure that it is lower than the feeding port to promote the free flow of materials.
Wear of material barrel and screw:
Regularly inspect and replace worn parts to prevent blockages caused by metal shavings or slag.
Unreasonable parameter settings:
Adjust the most suitable parameters such as temperature and feeding speed based on material properties to ensure uniform feeding.
In addition, regardless of the type of feeding machine, safety operating procedures should be strictly followed in daily operations, including but not limited to reviewing equipment status, ensuring a safe working environment, and correctly wearing personal protective equipment. Through these preventive and emergency strategies, the occurrence of material jamming can be effectively reduced and production efficiency can be improved.




