Blow molding machine is an equipment used for manufacturing hollow plastic products, and its operation process requires strict adherence to safety regulations and technical requirements. The following is a general operation process of a fully automatic blow molding machine based on search results:
1. Preparation before operation
Personnel training: Personnel who have not received professional training are not allowed to operate blow molding machines.
Electrical inspection: Before starting up, ensure that the machine is grounded to zero to avoid unsafe accidents caused by electrical leakage.
Cooling system inspection: Before heating, carefully check whether the cooling water in each part is connected.
2. Equipment adjustment
Position adjustment: Raise the machine to the appropriate position to ensure that the machine head does not collide with the template and prevent equipment damage.
Pressure setting: The pressure of the machine system is set before leaving the factory. Unless there are special circumstances, it should not be adjusted arbitrarily to avoid damage to the hydraulic system or affect normal operation.
3. Safety measures
Feeding safety: Workers are strictly prohibited from using the machine platform for feeding. Automatic feeding devices should be used to avoid the risks of electric shock, burns, and falling from heights.
Mold action safety: When the blow molding machine performs mold moving and opening and closing actions, operators are prohibited from entering the safety door area to prevent being pinched or bumped.
Operation safety: During the normal operation and production of the fully automatic blow molding machine, do not use your hands to break the extruded billet, in order to avoid being burned by high-temperature materials and electric cutting knives or being pinched by molds.
4. Emergency situation handling
Emergency stop button: In case of an emergency, quickly press the red emergency stop button to prevent the accident from further developing.
5. Specific operating steps (taking Tongjia blow molding machine as an example)
According to the operation process of Tongjia blow molding machine, the specific steps include but are not limited to the following:
Assembly inspection: If it is a newly purchased equipment, a machine assembly inspection should be conducted first to ensure that all components are installed correctly and meet production and safety standards.
Material preparation: The materials used for extrusion blow molding production should meet the required drying requirements, and further drying is necessary if necessary.
Head assembly: Select the appropriate head specifications based on the product variety and size, and complete the assembly in sequence.
Auxiliary system connection: Connect the compressed air pipe, install the core mold electric heating rod and the head heating coil, and check and turn on the water system at the same time.
Alignment correction: Adjust the gaps between the mouth mold evenly and confirm that the centerlines of the main and auxiliary machines are aligned.
No load test run: Start the extruder, locking device, mechanical arm and other operating equipment for no-load operation, and check whether all safety emergency devices are working properly.
Temperature setting and preheating: Set the temperature of the extruder head and each heating section according to the process conditions, and heat each section to a constant temperature state.
Billet wall thickness setting: On the programmable controller, the thickness of each point of the billet wall is set according to the process specifications.
Material feeding control: Usually, the outer layer of material feeding is started first, and the flow frequency is gradually increased to avoid material backflow from the outer layer or screw damage caused by excessive pressure.
Hydraulic oil inspection: Regularly check the hydraulic oil level gauges of the extruder and various hydraulic devices to ensure that the oil level in the oil tank remains above the reference oil level.
6. Quality monitoring and maintenance
Product quality inspection: After production, plastic products need to undergo quality inspection, including appearance, size, wall thickness, transparency, and other aspects.
Equipment maintenance: Regularly clean, lubricate, and replace damaged parts of the blow molding machine to ensure long-term stable operation.
The above process is for reference only. Please refer to the specific blow molding machine manual and relevant industry standards for actual operation.




