Apr 15, 2025 Leave a message

Working principle of screw conveyor

Basic conveying principle

When the spiral shaft rotates, the material is affected by its own gravity and friction with the groove wall, and can only move forward along the groove bottom of the conveyor under the push of the blades, just like a nut that cannot rotate moves in translation along a rotating screw. The movement of materials in the middle bearing relies on the thrust of the material moving forward from behind, so the transportation of materials in the conveyor is a sliding motion.

 

After the material is added to the screw conveyor from the feeding port, it is lifted under the action of gravity and centrifugal force. The material moves inward due to gravity, while centrifugal force causes it to move outward; When reaching a certain height, the material begins to slow down and rotates along with the speed of the spiral. As the spiral shaft rotates and the material continues to increase, its internal friction increases; When the material is balanced with internal friction, it rotates with the screw and is conveyed downwards.

 

The rotating spiral blades push the material in the groove or tube, and the loose material accumulates at the lower part of the groove under the action of its own weight and the frictional force of the casing, and is not pushed forward by the blades as they rotate.

 

Direction related principles

The rotation direction of the rotating shaft of the screw conveyor determines the direction of material transportation, but generally, the rotating blades of the screw conveyor are designed according to single item transportation. When conveying in the opposite direction, it will greatly reduce the service life of the conveyor.

 

Principle of special circumstances

During operation, the screw moves vertically due to the presence of friction and the gravity of the material; At the same time, due to its rotation, the screw undergoes horizontal displacement. As the running time prolongs or the degree of wear intensifies, the screw will undergo bending deformation or fracture damage, and new parts must be replaced to ensure normal production.

 

Send Inquiry

Home

Phone

E-mail

Inquiry