Apr 21, 2025 Leave a message

Working principle of feeding machine

The working principles of different types of feeders are different. Below, we will introduce the working principles of common vacuum feeders and small spring feeders:

Vacuum feeder

 

Basic principles

In the vacuum feeder system, when the vacuum pump is working, its inlet pipe forms a negative pressure airflow, and the material is transported from the inlet to the gas separator by the negative pressure airflow. Clean air returns to the atmosphere through the filter element. This method of using negative pressure airflow to transport materials is the basic working principle of a vacuum feeder.

 

Transportation process

Powder industry application: The conveying hopper (feeding bucket) is usually a conical shape with a filtering device and a back blowing device inside. The feeding bucket carries the product into it through the transfer pipe. When the bucket is in an overflow state, the vacuum pump automatically releases it through a pre-set program, and the material falls down from the discharge valve due to gravity. After the material bucket is empty, the vacuum pump automatically works through a pre-set program, the discharge valve closes the material bucket, and the material bucket returns to a vacuum state, starting the next cycle.

Injection molding application: When there is a shortage of material in the material bucket of the injection molding machine, a signal will be automatically transmitted to the suction machine. The suction machine uses the principle of exhaust to transport plastic raw materials into the material bucket of the injection molding machine. When the material reaches a certain level, the suction machine will stop working, and it will be transported again when the material is not enough.

 

Relationship between Material Transportation and Characteristics

The fluidity of materials has a significant impact on transportation, and can be determined by the stacking angle. The smaller the angle between the conical surface formed when the material slides from a fixed height and comes to a complete stop and the horizontal plane, the better the flowability of the material, and it will be more convenient and efficient to pass through the filtering device during transportation. However, for damp and viscous materials, the weight of the material increases due to the presence of moisture, making it difficult for the feeder to suck them into the hopper. Even if they are sucked in, they may still adhere to the filter element during filtration, resulting in the inability to continue the conveying process.

 

Small spring feeding machine

The small spring feeding machine is an automated production equipment mainly used to automatically feed small springs into the production device. Its working principle is to remove the spring from the tray through the transmission system, then position it at the feeding port, and at the feeding port, use a mechanical arm or other mechanism to clamp it and send it to the next device for processing or storage.

Send Inquiry

Home

Phone

E-mail

Inquiry