Massage Chair Blow Molding Machine
The blow-molded massage chair frame is a seat support structure manufactured using the massage chair blow molding machine process. It is mainly used in massage chairs, leisure chairs, office chairs and other fields. The following is a detailed introduction to its application characteristics, advantages and applicable scenarios:
Specification Date Sheet
| Basic information | Max products | 500L |
| Machine size | Length*Width*Height 7*3*5.5m | |
| Machine weight | 20T | |
| power consumption | 160KW | |
| evarage consumption | 55kw/h | |
| Plasticing system | screw | 110 Alloy screw for increased durability |
| L/D | 28:1 (High-efficiency mixing head, improved plasticizing ability) | |
| Plasticizing ability | 250KG/H | |
| screw heating section | 5 section | |
| screw heating power | 5kw/section | |
| screw cooling | automatic 5 section | |
| Extrusion motor | 75KW Frequency control of three-phase asynchronous motor | |
| motor brand | DASU | |
| Reduce box | ZLYJ-280 | |
| REDUCE BOX COOLING | Oil cooler water cooling | |
| Machine lifting | 4 points turbine synchronous lift, hydraulic motor drive | |
| Storage tank volume | 20L | |
| Maximum storage capacity | 15K gross weight | |
| Storage tank cooling | water cool | |
| Open and close system | Fixed mold opening and closing mechanism, diagonal double lever horizontal bar center mold clamping, large mold space, mold is fixed by abrasive plate, easy to disassemble, linear rolling guide | |
| Template size | Net width*height 1250*1400mm | |
| max mould size | Width*Height 1000*1600mm | |
| Opening and closing distance | Min-Max 600-1600(mm) | |
| Template movement method | Linear guide movement | |
| Clamping force | HIWIN | |
| linner guide | 1000KN | |
| Open and close mold cylinder | Supercharged oil cylinder with small diameter and high speed, which is 3 times the increase of ordinary oil cylinder | |
| Safety electric eye | red ray inspection | |
| mould cooling | 12 in 8out , effective on cooling mould | |
| Pump system | Controlled by our patented energy-saving hydraulic system, equipped with imported hydraulic valves, imported valves, with smooth and accurate action, factory life, good response | |
| Total system pressure | 14MPA/140KG | |
| servo motor | HaiTian servo motor 30kw | |
| Servo motor driver | HaiTian 30K w | |
| serve motor power | 30kw | |
| Hydraulic oil pump | Sumitomo QT-100CC | |
| Hydraulic solenoid valve | Taiwan youyan | |
| Oil pump form | Screw pump | |
| Hydraulic tubing | 4-layer tubing can withstand 350KG / 35MPA | |
| Electric control system | Using plc imported from Japan, the program is stable, the action is accurate, the function selection is comprehensive, and it is suitable for all finished product needs in the current market | |
| PLC | TAIWAN TAIDA | |
| Expansion module 4DA | TAIWAN TAIDA | |
| Temperature control module | taiwan PID | |
| Solid state voltage regulator | Precise output, long life, no sparks | |
| touch screen | taiwan taida (SCREEN SIZE 11 Inches) | |
| Frequency converter | Mide 75kw | |
| Contactor | LG | |
| air switch | Schneider, France | |
| 24V power supply | Omron Japan | |
| Electronic ruler for storage | Gefran | |
| serve motor ruler | Gefran | |
| Wall thickness controller | 100 POINTS | |
| Thickness servo valve | Atos, Italy | |
| Open and close electronic ruler | gefran italy | |
| Air control system | Adopt Taiwan imported pneumatic original parts, precise adjustment and long service life | |
| Pneumatic two-piece | Taiwan Yadeke | |
| Pneumatic pressure regulator | Taiwan Yadeke | |
| Pneumatic solenoid valve | Taiwan Yadeke | |
| Pneumatic throttle valve | Taiwan Yadeke | |
| Hydraulic | Adopt Taiwan imported pneumatic original parts, precise adjustment and long service life | |
| Oil pump motor | DASU | |
| oil pump motor power | 5.5KWQ | |
| oil pump name | Hydraulic plunger pump | |
| oil pump brand | Japan Yuken | |
| Spare parts for free | Mold platen M24 | 16pcs |
| Temperature control components | Thermocouple K 3pcs | |
| connector | LG GMC40 3pcs | |
| AIR SWITCH | Schneider IC65N 2PCS | |
| fuse | 1box | |
| connector | LG GMC18 2pcs | |
| air valve | 1pcs | |
| screw | M24*110 12pcs |
Core features
Lightweight design
The hollow structure formed by the blow molding process greatly reduces the weight (30%~50% lighter than the metal frame) while ensuring strength, making it easy to move and install.
High structural strength
Through the internal reinforcement rib design, it can withstand a large load (usually ≥150kg), suitable for frequent use scenarios.
Integrated molding
Reduce splicing parts, reduce the risk of cracking, and improve durability (lifespan can reach 8~10 years).
Rust and corrosion resistance
Polymer materials (such as HDPE, PP) are resistant to moisture and sweat stains and are suitable for long-term use.
Process advantages
- Cost-effectiveness: mold costs are lower than metal stamping, suitable for medium and large-scale production (unit cost is reduced by 20%~40%).
- Flexible design: curved surfaces and special-shaped structures can be made to adapt to ergonomic curves (such as lumbar support and neck curvature).
- Environmental protection: materials are recyclable, and the scrap rate during production is less than 5%.
Typical application scenarios
Home massage chairs:
Advantages: Quiet (no metal friction sound), warm touch (not cold in winter).
Case: The backrest frame of the zero-gravity massage chair needs to be adjusted at multiple angles with the motor.
Commercial shared massage equipment (such as airports and shopping malls):
Advantages: Resistant to frequent use, easy to clean and disinfect, and low maintenance cost.
Rehabilitation medical chairs:
Advantages: No sharp edges, high safety; customizable holes to adapt to rehabilitation equipment.
Market trends
- Material upgrade: Carbon fiber reinforced plastic (CFRP) begins to be used in high-end models, reducing weight by 15% while increasing strength.
- Intelligent integration: The skeleton reserves sensor wiring grooves, which are compatible with pressure detection and posture reminder functions.
Through the continuous optimization of the massage chair blow molding machine process, this type of skeleton is gradually replacing some metal structures, especially in the field of user experience and cost control. It is recommended to provide usage scenario drawings when selecting specific models, and the supplier will simulate the stress distribution and customize the solution.
Hot Tags: massage chair blow molding machine, China massage chair blow molding machine manufacturers, suppliers, factory, Air Duct Blow Molding Machine, Large Blow Molding Machine, Plastic Extrusion Blow Moulding Machine, Solar Power Base Blow Molding Machine, Toy Blow Molding Machine, Umbrella Base Blow Molding Machine
You Might Also Like
Send Inquiry